July 2025 JRD BIPEL started manufacture induction coils and induction heating platens after the transfer of MF Induction Heating to JRD BIPEL
March 2025 JRD BIPEL received new order to supply a new custom build press for the automotive industry.
March 2025 JRD BIPEL deliver factory rebuilt BIPEL 450 ton press for carbon fiber lamination.
January 2025 JRD BIPEL delivered NEW 125 ton preformer to form metal powder.
December 2024 – JRD BIPEL increased its production and storage facilities by taking on 10700 sq ft industrial unit with 3 ton and 16 ton overhead cranes.
October – 2024 JRD BIPEL delivered three factory rebuilt fully automatic BIPEL 150 ton presses for thermoset moulding.
August 2024 JRD BIPEL delivered B&T 500 ton lamination press
August 2024 – JRD BIPEL delivered NEW BIPEL 30 ton hydraulic press for insert moulding.
July 2024 – JRD BIPEL delivered BIPEL 150 ton side rams hydraulic press for DMC moulding
June 2024 – JRD BIPEL delivered NEW 125 ton preformer to form metal powder.
May 2024 – JRD BIPEL completed the refurbishment of B&T 500 ton press for the manufacture of body armour plates.
April 2024 – JRD BIPEL Delivered Factory rebuilt 150 ton down stroking hydraulic press. The press will be used for material testing and QC.
March 2024 – JRD BIPEL was a warded a contract to rebuild three off 150 ton down stroking hydraulic presses for thermoset moulding
February 2024 – JRD BIPEL Supplied two laboratory hydraulic presses to Sheffield University. Both presses had heated platens working at 450°C, cooling platens, profile temperature and pressure.
November 2023 – JRD BIPEL Supplied a laboratory hydraulic press to Plymouth University. The press had heated platens working at 450°C, cooling platens, profile temperature and pressure.
September 2023 – JRD BIPEL Supplied a laboratory hydraulic press to Portsmouth University. The press had heated platens working at 450°C, cooling platens, profile temperature and pressure.
April 2023 – JRD BIPEL received an order to supply BIPEL 300t and 400t presses.
April 2023 – JRD BIPEL completed rebuild of 450 ton hydraulic press with high temperature platens 450c.
March 2023 – JRD BIPEL received an order to supply BIPEL 150t press to a customer based in the USA.
March 2023 – JRD BIPEL completed rebuilding FOUR BIPEL 150T presses to a UK based customer
November 2022 – JRD BIPEL testing a new R&D compression press working at 425°C with water cooling for heated platens. Proportional pressure control. Ramp pressure and temperature. Preheat on either force or position. The new R&D press is designed for Universities, R&D institutions in the Aerospace, defence, oil and gas industries.
November 2022 – JRD BIPEL won a new order to factory rebuild BIPEL 300 ton compression press for metal drawing.
September 2022 – JRD BIPEL won new contract to factory rebuild 4 off BIPEL 150 ton compression presses.
The machines will be fitted with Omron PLC control system, modern Hydraulic manifold to reduce pipe connections, new safet to comply with current regulations and new panels.
